无毒在线看片你懂的 视频区国产日本 天堂久久青草东京 在线观看视频一区二区三区

BC-5565 Ordinary Self sealing Bag Blowing Film Machine

Location:Home  / Product  / Film blowing machine / Ordinary self sealing bag blowing machine

Ordinary self sealing bag blowing machine

  • Stable quality: Implement full process quality monitoring, meticulous and comprehensive testing!
  • Reasonable price: Strictly controlling costs, reducing expenses, and benefiting customers!
  • Fast delivery: With a new production line and sufficient stock, the delivery time has been shortened!
  • Tel:15068436659

BC-5565 Ordinary Self-Sealing Bag Film Blowing Machine


Model

BC-55

BC-65

BC-85

Raw Material

LDPE(density0.921)

LDPE(density0.921)

LDPE(density0.921)

Blown film Width

50-450mm

50-550mm

50-750mm

Blown film thickness

0.03-0.10mm

0.03-0.10mm

0.03-0.10mm

Diameter of screw

Φ45

Φ55

Φ55

LD

28:1

28:1

30:1

Main power

5.5kw

7.5kw

15kw

Vice power

0.75kw

1.1kw

2.2kw

Heart

15kw

15kw

15kw

Cooling

1.1kw

1.1kw

2.2kw

Total power

28kw

28kw

30kw

Voltage

50Hz-60Hz 380V

50Hz-60Hz 380V

50Hz-60Hz 380V

Output

5-30kg/h

5-30kg/h

5-35kg/h

Dimension

(L×W×H)

6000×1600×4200mm

6000×1600×4200mm

6000×1600×4500mm

Weight

1500kg

1500kg

2000kg


Cleaning and Maintenance of Self sealing Bag Blowing Film Machine

1. When cleaning the extruder and die, copper knives, rods, or compressed air can be used for cleaning, but do not damage the screw and the smooth surface of the screw.

2. Before starting up the machinery, it is necessary to inspect the deceleration device and lubrication device to avoid damage to the machine and noise caused by dry operation.

3. Within the range of film-forming conditions, increase the molding temperature, cooling air temperature, and blowing expansion ratio; So the turbidity of the film increases and the glossiness decreases; On the contrary, it increases.

When the discharge from the mold mouth is uniform and consistent, you can wear gloves and slowly pull the tube blank. At the same time, close the end of the tube blank, slightly open the air inlet control valve, and put a small amount of compressed air into the center hole of the core rod. Then, carefully guide it through the stable foam holder and the herringbone plate, and thread it into the traction roller and guide roller until it is rolled (if you want to emboss, you need to pass through the embossing roller)

5. The compressed air pressure for blowing and expanding the tube blank should be appropriate, which should not cause the tube blank to rupture, but also ensure the symmetry and stability of the membrane tube, relatively ensuring the quality of production


Related

If you have any questions or suggestions about the product, or if you want to know more, you can contact us at any time.

  • WhatsAppWhatsApp
  • WebsiteWebsite
  • WeChatWeChat

    Contact Us

  • Add:Room 101 Building 9 Wanyang Zhongchuang City No. 9 Yangyu Road Binhai New Area Pingyang County Wenzhou City Zhejiang Province
  • Tel:0577-63099915
  • Fax:0577-63099915
  • 15068436659 More contact